IRCOS JSC

Technical Means for Radio Monitoring

Investigations - Design & Engineering - Manufacturing - Delivery - Maintenance

ARGAMAK-CS

Digital Panoramic Radio Receiver

Purpose:

Radio receiving unit of ARGAMAK-CS

Radio receiving unit of ARGAMAK-CS

Typical configuration:

Options

Features:

Technical Specifications

Operating frequency range 0.009-8000 MHz
Number of receiving channels 1
Standing Wave Ratio (SWR) at antenna input with input resistance 50 Ohm 3 max.
Type of antenna input connectors N
Maximum allowable input voltage 140 dBµV
Sensitivity (with 3.125 kHz discreteness and 10 dB signal/noise ratio) 1 μV, max.
Noise figure (with preamplifier on) for unswitched inputs:
within 0.009 - 30 MHz range 15 dB, max.
within 20 - 3000 MHz range 12 dB, max.
within 3000 - 8000 MHz range 12 dB, max.
Single-signal dynamic range, taking into account the gain control at resolution not exceeding 16 kHz (with a spectrum discreteness of 3.125 kHz) 130 dB, min
Intermodulation free dynamic range (3rd and 2nd order) at resolution not exceeding 16 kHz (with a spectrum discreteness of 3.125 kHz) 75 dB, min
Attenuation 0 - 60 dB, incr 1 dB
IF-input 70 MHz
Max. simultaneous bandwidth (bandpass) at ±3.0 dB variation:
Within 0.009 - 5 MHz range 1 MHz, min.
Within 5 - 20 MHz range 2 MHz, min
Within 20 - 110 MHz range 5 MHz, min.
Within 110 - 220 MHz range 10 MHz, min
Within 220 - 8000 MHz range 24 MHz, min
Additional analog bandwidth 0.5 MHz
Receiver tuning resolution 1 Hz
Single-signal spurious, Image and IF rejection:
Within 0.009 - 3000 MHz range 80 dB, min
Within 3000 - 8000 MHz range 70 dB, min
Phase noise level of heterodyne when mistuning at 10 kHz
Within 0.009 - 30 MHz range -100 dBs/Hz, max.
Within 20 - 3000 MHz range -100 dBs/Hz, max.
Within 3000 - 8000 MHz range -90 dBs/Hz, max.
Input IP2, attenuation off
Within 0.009 - 30 MHz range 30 dBmW min.
Within 20 - 3000 MHz range 40 dBmW min.
Within 3000 - 8000 MHz range 30 dBmW min.
Input IP3, attenuation off
Within 0.009 - 30 MHz range 0 dBmW min.
Within 20 - 3000 MHz range 10 dBmW min.
Within 3000 - 8000 MHz range 0 dBmW min.
Relative frequency instability of the built-in reference generator max. ±5×10-7
Typical retuning time 2000 µs
Parameters of external reference generator input:
Frequency 10 MHz; 12,8 MHz
Level 0±3 dBm
Demodulator bandwidth 250 kHz, 100 kHz, 50 kHz, 12 kHz, 6 kHz
Receiver sensitivity in AM mode 1.5 μV, max.
Receiver sensitivity in FM (narrow) mode 0.8 μV, max.
Demodulation types AM, FM, SSB, FT
Panorama spectrum analysis rate when scanning over 220 - 3000 MHz frequency range (with 12.5 kHz spectrum discreteness) 10 GHz/s, min
Minimum duration of single signal detected within simultaneous bandwidth (receiver tuning frequency doesn't change) 1 µs
Types of recorded data Spectrum, time, signal sampling (I/Q)
Continuous recording time Depends on the storage volume
Maximum I/Q bandwidth 24 MHz
I/Q output interface Ethernet 1G
External equipment control interface RS-485
DC supply voltage 10 - 30 V
Voltage of AC power supply 90-250 V
Power consumption 70 W, max.
Dimensions, max. 490×280×150 mm
Weight 10 kg, max
Operating temperature range -20°C … +45°C
Relative humidity at 25°С max. 98%
Maximum altitude above-sea level 4500 m

Digital Radio Receivers