ARC-PS9
Tuner Module
Purpose:
- Filtering, amplification and conversion of SHF signals to an intermediate frequency.

ARC-PS9 Module
Features:
- Signal conversion from radio frequency of 8 – 30 GHz to frequency range of 2.7 – 8 GHz with spurious rejection
- Two independent inputs for frequency ranges of 8 – 18 GHz and 17.7 – 30 GHz
- Switchable input low-noise amplifier
- Controlled input attenuator
- Frequency synchronization from external reference generator (no built-in reference generator)
- Option to power active antenna or amplifier via feeder
- Built-in system of technical diagnostics
- Filtering, amplification and conversion of signals from radio frequency of 2.4 – 30 GHz to an intermediate frequency as a result of joint operation with ARC-PS8.
Technical Specifications
| Operating frequency range | 8000-30000 MHz |
| Number of receiving channels | 1 |
| Standing Wave Ratio (SWR) at antenna input with input resistance 50 Ohm | |
| within 8000 – 18000 MHz range | 3 max. |
| within 18 000 – 30 000 MHz range | 3.5 max. |
| Maximum allowable input voltage | 127 dBµV |
| Noise figure (with preamplifier on) for unswitched inputs: | |
| within 8000 – 18000 MHz range | 12 dB, max. |
| within 18 000 – 24 500 MHz range | 16 dB, max. |
| within 24 500 – 30 000 MHz range | 22 dB, max. |
| Attenuation: | |
| within 8000 – 18000 MHz range | 0, 5 - 35 dB, incr 1 dB |
| within 18 000 – 30 000 MHz range | 0, 10 - 35 dB, incr 1 dB |
| Bandpass at ±3.0 dB variation | |
| within 8000 – 18000 MHz range | 160 MHz, min. |
| within 18 000 – 30 000 MHz range | 200 MHz, min. |
| Receiver tuning resolution | 100 MHz |
| Single-signal spurious, Image and IF rejection: | |
| Within 8,000 - 18000 MHz range | 70 dB, min |
| Within 18,000 - 30000 MHz range | 45 dB, min |
| Phase noise level of heterodyne when mistuning at 10 kHz | |
| Within 8,000 - 18000 MHz range | -95 dBs/Hz, max. |
| Within 18,000 - 30000 MHz range | -90 dBs/Hz, max. |
| Input IP3, attenuation off | 0 dBmW min. |
| Typical retuning time | 500 µs |
| Parameters of external reference generator input: | |
| Frequency | 10 MHz or 12.8 MHz |
| Level | 0±3 dBm |
| Control interface | RS-485 |
| DC supply voltage | 10 - 32 V |
| Power consumption | 10 W, max. |
| Dimensions, max. | 100×168×18 mm |
| Weight | 0.5 kg, max. |
| Operating temperature range | -40°C … +75°C |
| Relative humidity at 25°C | max. 98% |
| Maximum altitude above-sea level | 4500 m |
