ARC-NK5I
Manpack Radio Monitoring and Direction Finding Measuring System
Purpose:
- Field strength measurement
- Measurement of radio signal parameters
- Manual direction finding
- Detection and localization of radio emission sources, including wireless communication and data transmission systems
- Identification and direction finding of a selected GSM mobile phone, DECT base or subscriber station,
Wi-Fi devices - Panoramic spectrum analysis
- Radio signal recording and technical analysis
- Radio channel monitoring.

Electromagnetic field strength measurement with ARC-NK5I
Typical configuration:
- ARGAMAK-M Panoramic Measuring Radio Receiver
- Mobile control and display unit (an smartphone based on OS Android) with SMO-ANDROMEDA Software Package
- Measurement antenna set
- ARC-A6A Antenna System for manual direction finding, comprising handle with smartphone holder and replaceable directional active antennas:
- ARC-A6-HF (0.3 – 30 MHz)
- ARC-A6-1A (25 – 500 MHz)
- ARC-A6-2A (400 – 8000 MHz)
- AC network power supply unit
- Batteries and charger
- Shoulder bag for equipment

ARC-NK5I Handheld Measurement System with measurement antenna and a Smartphone as a control and display unit
Options:
- Control and display module
- ARC-KNV3M External Remote-Controlled Frequency Down-Converter (2.4-8 GHz)
- ARC-A7A-3 Broadband Antenna for Installation on Vehicle (20 – 8000 MHz)
- Directional antenna set for concealed direction finding
- Equipment carry bag for concealed mode operation
- Control and display unit (rugged Tablet PC) with SMO-PAI, SMO-STA, SMO-ASPD, SMO-RP Software Packages.
- Shockproof case for storage and transportation
- SMO-BS 3GPP Software Package for Automated Monitoring of NB-IoT, GSM, UMTS, LTE, 5G Base Stations Certificate of state registration of software packages No. 2025615525
- SMO-BS CDMA/EVDO Software Package for Automated Monitoring of CDMA/EVDO Base Stations. Certificate of state registration of software packages No. 2015662423
- SMO-BS TRUNK Software Package for Automated Monitoring of DMR, dPMR, NXDN, APCO P25 and TETRA Network. Certificate of state registration of software packages No. 2024665131
- SMO-BS DECT Software Package for Automated Monitoring of DECT Base Stations Certificate of state registration of software packages No. 2015662411
- SMO-BS Wireless Software Package for Automated Monitoring of short-range wireless networks (Wi-Fi, WiMAX, LoRaWan, Bluetooth, Zigbee). Certificate of state registration of software packages No. 2025618779
- SMO-CT Customized Software for Automated Monitoring of digital TV signals (DVB-T/T2/H, DTMB). Certificate of state registration of software packages No. 2015613938.
Features:
- Small weight and dimensions
- Fast deployment
- The antennas of ARC-A6A can be used both in active and passive mode.
- Design of the handle and antenna elements enables detection of radio emission sources with vertical and horizontal polarization
- The handle is optimized for operation in the field conditions
- The weight of the handle with the antenna is 800 gram max., the center of gravity is located below the palm level thus enabling to work longer without getting tired.
- Power supply from built-in batteries, external AC mains or vehicle on-board DC.
Technical Specifications
| Operating frequency range: | |
| Basic configuration | 9 kHz - 3 GHz |
| When ARC-KNV3M is available (within 3 - 8 GHz range the unit doesn’t provide for certified measurements, because ARC-KNV3M Frequency Down-Converter isn’t certified as measuring instrument and is used as searching and localization tool only) |
9 kHz - 8 GHz |
| Intermodulation free dynamic range (3rd and 2nd order) | 75 dB, min |
| Receiver tuning discrete | 1 Hz |
| DF operating frequency range: | |
| Basic configuration | 300 kHz - 3 GHz |
| with ARC-KNV3M | 300 kHz - 8 GHz |
| DF method | Amplitude |
| DF sensitivity (20 - 3000 MHz) | 3 - 15 μV/m |
| Signal level evaluation limits (with attenuators) | -30 - +110 dBµV |
| Load recording duration (when storage is available) | Depends on the storage volume |
| Registered parameters | Amplitude-frequency-time |
| Panorama spectrum analysis rate when scanning over 25 - 3000 MHz frequency range (with 12.5 kHz spectrum discreteness) | 5 GHz/s, min |
| Receiver sensitivity | 0.8 - 1.5 µV |
| Types of recorded data | Signal, time, frequency |
| Maximum simultaneous bandwidth | 24 MHz |
| Maximum I/Q bandwidth: | |
| Continuous | up to 5 MHz |
| Fragments | Up to 22 MHz |
| Frequency band width for signal recording to internal storage (when available): | |
| Within band up to 2 MHz | 120 minute, min |
| Within 5 MHz band | 60 minute, min |
| Within 10 MHz band | 30 minute, min |
| Decoding service information of digital communications network signals | GSM, UMTS, LTE, CDMA (IS-95, cdma2000, EV-DO), TETRA, DECT, DMR, dPMR, NXDN, 5G, APCO P25, Wi-Fi, WiMAX, NB-IoT, LoRaWan, Bluetooth, Zigbee |
| Continuous run-time of battery | 4 hour, min |
| DC supply voltage | 10 - 32 V |
| Voltage of AC power supply | 90 - 250 V |
| Receiver dimensions | 110×60×245 mm |
| Overall dimensions of the operating set including carriage means | 400×300×150 mm |
| Handheld antenna system weight (with smartphone) | 1 kg, max |
| Weight of radio receiver | max. 1.7 kg |
| Operating set weight (with single antenna) | 3.5 kg, max. |
| Weight of complete set | 10 kg, max |
| Operating temperature range when using rugged Tablet PC as control and display unit | -20°C – +45°C |
Other technical specifications corresponds to parameters of ARGAMAK-M Digital Measuring Radio Receiver.
